Table of Contents
Advertisement
Operations
Barcode Scan Mode
Startup Option
Select Language
Save/Restore <Config>
Saves and restores settings and initialize them to initial ones.
≥ Selecting "Yes" will execute the operation.
≥ The following items will not be affected.
` "Change Password" ( 53)
` "Date/Time" ( 54)
Restore Defaults
Save Config File
Restore Config File
Operating the control panel
Specify the read mode for 1D/2D code.
CODE39 Only: Read CODE 39 of 1D code only.
QR CODE Only: Read QR CODE of 2D code only.
CODE39 + QR CODE: Both CODE 39 of 1D code and QR CODE of 2D code
can be read.
≥ The read time may be longer for "CODE39 + QR CODE".
≥ The initial setting is "CODE39 Only".
On: The unit turns on automatically after DC power source supply starts.
Off: The unit turns off automatically after DC power source supply starts and the
unit turns on.
Previous Status: If DC power source supply stops while the unit is turned on, the
unit will turn on after DC power source supply starts. If DC power source supply
stops while the unit is turned off, the unit will turn off automatically after DC power
source supply starts and the unit turns on. ( 101)
≥ The initial setting is "Off".
Specify the language to be displayed on the panel screen.
Discards the unit settings and initializes them to initial ones (factory settings).
Saves a file containing the unit settings (file name: 8.3 filename, extension: .bin) to
a USB memory.
≥ Use a USB memory in FAT16 or FAT32 format.
Restores the unit settings from the USB memory.
≥ Use a USB memory in FAT16 or FAT32 format.
≥ Drop a file with saved settings (file name: 8.3 filename, extension: .bin) just
under the root folder of the USB memory.
≥ Specifies a file.
55
Advertisement
Table of Contents
