Table of Contents
Advertisement
Operations
Makes settings for IPv4.
≥ The settings can be made when "IP Stack" has been set to "IPv4" or "IPv4+6".
DHCP
IPv4
IPv4 Address*
Netmask*
Gateway*
Makes settings for IPv6.
≥ The settings can be made when "IP Stack" has been set to "IPv6" or "IPv4+6".
Stateless Auto Config
DHCP
IPv6
IPv6 Address (Static)*
Gateway*
Prefix Length*
Operating the control panel
Sets DHCP.
On: Enables DHCP.
Off: Disables DHCP.
≥ The initial setting is "Off".
Sets an IPv4 address.
1
≥ Input the address in decimals.
Sets a netmask address.
1
≥ Input the address in decimals.
Sets a gateway address.
1
≥ Input the address in decimals.
Sets a stateless auto configuration.
On: Enables a stateless auto configuration.
Off: Disables a stateless auto configuration.
≥ The initial setting is "Off".
Sets DHCP.
On: Enables DHCP.
Off: Disables DHCP.
≥ The initial setting is "Off".
Sets an IPv6 address.
1
≥ Inputs the address in hexadecimals.
Sets a gateway address.
1
≥ Inputs the address in hexadecimals.
Sets an IP address prefix length.
1
≥ Inputs a decimal number from 0 to 128.
≥ The initial setting is "0".
60
Advertisement
Table of Contents
