Table of Contents
Advertisement
Others
Item
SNMP
Email notification
Setting
Troubleshooting guide
Problem
Trap notification is not delivered.
Cannot access the unit from the
SNMP manager with SNMP.
Does not receive email.
(Warning code: W1030)
No SMTP warning, but does not
receive email.
Turning on the unit after turning off/
on the external power supply
clears some settings of the unit, for
example those of the clock.
126
Cause/Solutions
)Refer to "Network" ( 125).
)Check the trap notification destination
address.
)Verify the SNMP settings "Community
Name" and "Target 1 IP Address/
Target 2 IP Address/Target 3 IP
Address". ( 58, 96)
)Refer to "Network" ( 125).
)Verify the SNMP settings "Community
Name" and "Target 1 IP Address/
Target 2 IP Address/Target 3 IP
Address". ( 58, 96)
)When DHCP is used, check if the IP
address has not been updated.
)Refer to "Network" ( 125).
)Make sure the SMTP server settings
are correct.
)Make sure the Email destination is
correct.
)Check the recipient has not set the
rejection of all messages.
)Internal battery may be depleted.
Contact your support service provider.
( 138)
Advertisement
Table of Contents
