Table of Contents
Advertisement
Operations
Diagnostic
The unit provides a self-diagnostic function.
The self-diagnostic function operates at predetermined times on the built-in changer unit, drive system, flash
memory on the controller, fans, control panel, internal host interface and external power supply, respectively.
You can also execute the self-diagnostic function by selecting "Manage" "Diagnostic" on the control panel or the
Web interface.
≥ After "Diagnostic" has completed, select "Monitor" "S.M.A.R.T." and check the log files ( 110) to review the
diagnostic results of each equipment.
≥ When a magazine is loaded in the drive system, "Diagnostic" cannot be executed.
Check whether a magazine has not been loaded by selecting "Monitor" "Drive" "Magazine Address" or
"Monitor" "Changer" "Magazine Address". If a magazine is loaded in the drive system, use the application to
eject the magazine, or unlock the right and left magazine drawers, insert the magazine and try again.
≥ To avoid any impact on the application, terminate it prior to running the "Diagnostic" function.
≥ The duration of "Diagnostic" depends on the condition and it may take as long as about 5 minutes.
Self-diagnostic function execution
Changer unit
Drive system
Flash memory on the controller
Fan
Control panel
Internal host interface
External power supply*
*1
The self-diagnostic function executes about every 30 days when the power is continuously on.
There is no impact on the application as it is a background operation.
*2
Only certain external power supply models that have been validated to work with the unit.
≥ During the self-diagnostic process, fans, changer unit and drive system are operated for an accurate diagnosis.
≥ Please note that self-diagnostics cannot detect all anomalies.
Various Functions
Power on
±
±
±
±
±
±
±
2
About every 30 days
s
s
±
±
±
s
±
109
During "Diagnostic"
*1
execution
±
±
±
±
±
s
±
Advertisement
Table of Contents
