Table of Contents
Advertisement
Introduction
∫ Required connections (solid/double lines)
Base Module/Bottom Module/Control Unit/Writer Unit:Uses a control interface port
External power supply: Uses the power connector and the I/O port (certain external power supply models that
Server: Uses a host interface port
∫ Optional connections (dotted lines)
The LAN ports are used
Web interface (PC that uses a Web interface): When using a Web interface
NTP server: When using a timeserver
DHCP server: When using DHCP on a LAN port
SNMP manager: When using SNMP
SMTP server: When using the email notification
The iSCSI host interface port is used (iSCSI interface models only)
DHCP server: When using DHCP on the iSCSI host interface port
The USB ports are used
USB memory:
When using the following functions:
` Saving and restoring settings through the control panel
` Updating the software through the control panel
` Acquiring logs through the control panel
Overview of functions
have been validated to work with the unit only)
6
Advertisement
Table of Contents
