Table of Contents
Advertisement
Operations
SNMP <Configure>
Sets SNMP. Three targets can be set as SNMP trap destinations.
≥ Change the settings, then select "Submit" to accept the change.
Enabled
Target 1 - IP Address
Target 2 - IP Address
Target 3 - IP Address
Community Name
MIB File
Web interface operation
Selects the use or non-use of SNMP.
≥ This function is disabled in the initial setting.
Sets the IP address and the SNMP Version of Target 1/2/3.
Sets an SNMP community name.
≥ The initial setting is "public".
To improve security, it is recommended that the initial setting be changed
according to a setting made on the SNMP manager.
≥ A maximum of 256 characters can be input.
Download MIB files.
96
Advertisement
Table of Contents
