Table of Contents
Advertisement
Operations
Drive <Monitor>
Indicates information concerning the drive system of the unit.
≥ Select a module. ( 30)
(To display the module selection screen again, select A.)
Status
Add Info
Medium Removal
Power On Time
Temperature
RAID / Encrypt
Operating the control panel
Indicates the state of the drive system of the unit.
Ready: Normal.
Not Ready: Starting up or performing a self-diagnosis.
Not Usable: Not available due to trouble.
Indicates additional information of "Status" (only when "Status" is set to "Ready").
No Disc: Discs are not in.
DiscIn: Discs are in.
DiscIn W Protect: Discs are in, but they are write-protected.
DiscIn R/W NG: Discs are in, but a write/read error has occurred.
Indicates the permission status for ejecting media from the drive system.
prevented by host: The application prohibits the ejection of the disk from the
drive.
≥ The disk can be ejected if this shows blank.
Indicates the time of power supply to the drive system.
Indicates an internal temperature of the drive system.
Indicates the RAID level setting and the enable/disable setting on writing data
encryption.
RAID 0: RAID 0 is set.
RAID 5: RAID 5 is set.
RAID 6: RAID 6 is set.
≥ When there are no discs or if there is an unformatted disc inserted, "---" is
displayed.
≥ For details, refer to "RAID functions" ( 103) and "Encryption of write content"
( 102).
40
Advertisement
Table of Contents
