Table of Contents
Advertisement
Operations
Email notification
The details of the error or warning will be sent by email according to the email notification settings.
The error or warning code is included in the subject and message of the email.
≥ In order to send a test email to the address set in "To Email Address" ( 57, 95) following the steps below.
` Control panel: "Config" "Email Notice" and select "Test" ( 57)
` Web interface: "Configure" "Email Notification" and uncheck "Notify Errors" and "Notify Warnings", then check
"Enable Email Test", select "Submit" ( 95)
Confirm receiving the test email and, if necessary, set up "Notify Errors" and "Notify Warnings".
The subject of the email is structured as follows.
Error/Warning Code
[E1030] [2015/01/01 10:00:00 (YMD)] [LB-DH8] [DATA ARCHIVER]
*1
The date format is specified format/The time format is 24-hour.
*2
Multiple lines will be displayed depending on the content.
The following content is included in the email message.
Various Functions
Product Name
Error Date*
1
System Name*
2
106
Advertisement
Table of Contents
