Panasonic LB-DH8 series Operator's Manual page 18

Introduction
User label
The following labels can be attached to a user label area of a magazine.
` 1D or 2D code label (only one of them)
` Label with a character string (for magazine management)
The 1D/2D code label and the character string label can be used separately or together. However, the label should
be attached in the predetermined area and not overlap each other.
Specifications on 1D codes
<
Standard:
Label size:
Maximum number of characters:
Thin bar width:
Ratio of thin bars to thick bars:
Inter-character gap:
Bar length:
Leading and trailing margins:
Color (recommended)
e.g.,
70 mm (2.75z) or smaller
Specifications on 2D codes
<
Standard:
Label size:
Maximum number of characters:
Cell size:
Margins in four directions:
Color (recommended)
e.g.,
DATA ARCHIVER
* "dot" refers to the smallest printing unit of a printing device.
e.g., Printing with the maximum size of 14 mm (0.55z) k14 mm (0.55z)
600 dpi printer: Printable with Version 7 or earlier (45 k 45 cells)
300 dpi printer: Printable with Version 4 or earlier (33 k33 cells)
Handling a magazine and magazine drawer
>
Code39
14 mm (0.55z) (H) k 70 mm (2.75z) (W) or smaller (with margins)
12 characters (without stop and start codes)
12 mil (= 0.305 mm (0.012z)) or more
1:2.75
12 mil (= 0.305 mm (0.012z)) or more
7 mm (0.28z) or more
3.05 mm (0.12z) or more
Black (code), White (background)
7 mm (0.28z) or more, 14 mm (0.55z) or smaller
>
QR code (Model 2)
14 mm (0.55z) k 14 mm (0.55z) or smaller (with margins)
256 characters (alpha-numeral), 256 byte (UTF-8)
4 dots* or more and 0.254 mm (0.01z) or more per side
4 cells or more (A larger size is easier to read)
Black (code), White (background)
14 mm (0.55z) or smaller
14 mm (0.55z) or smaller
18