Table of Contents
Advertisement
Operations
Encryption of write content
This unit enables the encryption of the write/read contents.
The data encryption can be used corresponding to Advanced Encryption Standard (AES) with a key length of 256
bits.
The encryption key is available from the application. For more information, refer to the user manual for the
application.
The encryption is set when formatting a magazine.
Use the encrypted magazine with the encryption key. All magazine data including the file system information is
encrypted. If the encryption key is incorrect, the magazine cannot be recognized in the file system.
≥ When you confirm the encryption of magazine, select "Monitor" "Magazine" on the control panel or the Web
interface magazine, then select "Encryption" on the screen of the Magazine detailed information. ( 43, 78)
≥ To confirm whether the unit has been set as encrypted by the application, select "Monitor" "Drive" "RAID /
Encrypt" or "Monitor" "Drive" "Encrypt Mode" on the control panel or the Web interface. ( 40, 76)
Verify mode
The unit provides verification functions with Auto Verify mode and All Verify mode. The verify mode can be set from
the application. For more information about the settings, refer to the application manual.
≥ To verify the current settings, select "Monitor" "Drive" "Verify Mode" in the control panel or the Web interface.
( 41, 76).
≥ The initial setting is "Auto Verify".
∫ Auto Verify mode
While keeping the write performance to ensure appropriate writing quality for storing, verify only the required data
under certain conditions.
∫ All Verify mode
Playback all written data to verify performance. The writing transfer rate is down to about half in the All Verify mode.
Various Functions
102
Advertisement
Table of Contents
