Table of Contents
Advertisement
Introduction
Host interface specifications
The method of connecting a server to the Base Module or the Writer Unit depends on the type of host
interface.
SAS interface (LB-DH80A, LB-XD82A)
Use an external SAS cable to make a direct connection. In this case, note that the interface adaptor and cable shall
be compatible with a transfer rate of 6 Gbps.
SAS cable specification
≥
Use a Mini SAS 4x (SFF8088 26-CKT External Universal Key) cable for an external connection.
iSCSI interface (LB-DH80S, LB-XD82S)
Use a LAN cable to make an iSCSI connection. In this case, note that the interface adaptor and cable shall be
compatible with a transfer rate of 10 Gbps.
≥ LAN cable specifications
Use shielded LAN cable (straight connection) of Category 7 (CAT7).
FC interface (LB-DH80F, LB-XD82F)
Use an optical fiber cable to make a connection directly or via SAN. In this case, note that the interface adaptor and
cable shall be compatible with a transfer rate of 8 Gbps.
≥ Optical fiber cable specification
Use a multi-mode fiber optical cable that supports OM3 and has LC connectors.
Overview of functions
7
Advertisement
Table of Contents
