Table of Contents
Advertisement
Warning display
Newly added warning indications are described in this section. For more information, refer to the operating instructions of the product. Displayed items
and indications may differ depending on the model you use.
Screen display
For the location and position of the display, or other items displayed, refer to the operating instructions of the product.
Indication
AUTH NG CARD
PB INTERMITTENT
SD CARD
REC IMPOSSIBLE
Error codes
Error codes other than the below listed are the same as when using a P2 card. Refer to the operating instructions of the product.
r AJ‑HPX3100G/AJ‑HPX2000P/AJ‑HPX2100E/AG‑HPX600P/AG‑HPX600EJ/AG‑HPX600EN
Code number
An SDHC/SDXC memory card is inserted into
[E‑72]
the P2 card slot. (The viewfinder shows [SD
CARD] (slot number).)
An SDHC/SDXC memory card is inserted into
the P2 card slot.
[E‑73]
Data cannot be recorded on SDHC/
SDXC cards. (The viewfinder shows [REC
IMPOSSIBLE] (slot number).)
CPS authentication of the microP2 card has
[E‑74]
failed. (The viewfinder shows [AUTH NG
CARD] (slot number).)
r AG‑HPD24P/AG‑HPD24E/AJ‑HPM200P/AJ‑HPM200E/AJ‑HPD2500P/AJ‑HPD2500E
Code number
Intermittence of playback has occurred on the SDHC/SDXC memory
[E‑76]
card. (When switched to the detail display, [PB INTERMITTENT] (slot
number) is indicated.)
[E‑72]
An SDHC/SDXC memory card is inserted into the P2 card slot.
An SDHC/SDXC memory card is inserted into the P2 card slot.
[E‑73]
Data cannot be recorded on SDHC/SDXC cards. (When switched to
the detail display, [REC IMPOSSIBLE] (slot number) is indicated.)
CPS authentication of the microP2 card has failed. (When switched to
[E‑74]
the detail display, [AUTH NG CARD] (slot number) is indicated.)
CPS authentication of the microP2 card has failed. Recording and playing back of microP2 cards whose CPS authentication
has failed are disabled. See "Manual authentication" (page 6) and change the settings.
Intermittence of playback has occurred on the SDHC/SDXC memory card. The playback of the inserted card is not
guaranteed. It is recommended that you use a microP2 card or P2 card.
An SDHC/SDXC memory card is inserted into the P2 card slot. Although the operation continues, it is recommended that
you use a microP2 card or P2 card for recording data.
An SDHC/SDXC memory card is inserted into the P2 card slot. Data cannot be recorded on SDHC/SDXC cards. Use a
microP2 card or P2 card.
Detail
Although the operation continues, it is
recommended that you use a microP2 card or
P2 card for recording data.
Use a microP2 card or P2 card for recording
data.
Recording and playing back of microP2
cards whose CPS authentication has failed
are disabled. See "Manual authentication"
(page 6) and change the settings.
Detail
Warning display
Detail
Recording operation
The playback of the inserted card is not guaranteed. Although the
operation continues, it is recommended that you use a microP2 card
or P2 card.
Although the operation continues, it is recommended that you use a
microP2 card or P2 card for recording data.
Use a microP2 card or P2 card for recording data.
Although the operation continues, recording and playing back of
microP2 cards whose CPS authentication have failed are disabled.
See "Manual authentication" (page 6) and change the settings.
– 8 –
Indication on the display window
(AJ‑HPX3100G)
The error code flashes once in two seconds
on the time code display in the display area.
(AG‑HPX600P/AG‑HPX600EJ/
AG‑HPX600EN)
The error code is displayed on the [HOME]
screen of SmartUI.
Recording operation
Advertisement
Table of Contents
