Table of Contents
Advertisement
LiAM User's Manual
Connections to the load must be carried out considering that the DC output
connector pinout, made by terminal blocks, is presented in
PIN 1:
OUT+
C
The corresponding pinout is:
pin 1: positive output terminal;
pin 2: negative output terminal;
as indicated on the label that can be found over the terminal connector (where also
output current and output voltage ratings are presented).
Suggested cable section for output is 1.5 mm
Please be aware that the output voltage of the LiAM 6005 module can
reach a maximum of ±60V so that the screw terminals of these connections
can be found at a high voltage with respect to EARTH potential.
85
Annex A - Output Connectors
Figure 30: output connector pinout
WARNING
Annex A - Output Connectors
:
Figure 30
2
2
– 2 mm
, or 15 AWG - 14 AWG.
PIN 2:
OUT-
C
Advertisement
Table of Contents
