Mup" Command - Caen ELS LiAM 6005 User Manual

Remote Control

5.3.18 "MUP" Command

The 'MUP\r' (Module UPdate) command performs an update of the power
supply LiAM actual parameters with the parameters read from the module internal
EEPROM.
As an example, the MWF command updates only the content of the selected
EEPROM field but not the corresponding LiAM parameters. In order to make the
module update its parameters it is necessary to perform the 'MUP\r' command: this
was done not to apply wrong or undesired transmitted values on-the-fly without
wanting it.
Replies from the power supply are in the form '#AK\r', or '#NAK\r'; this non-
acknowledgment reply is generated when:
 the LiAM module is ON (it is necessary to shut-down the channel with
MOFF command first).
Examples:
MUP example with the module OFF:
MUP\r
MUP example with the module ON:
MUP\r
LiAM User's Manual
#AK\r
#NAK\r
72