Monitor Page - Caen ELS LiAM 6005 User Manual

LiAM User's Manual

4.2 Monitor Page

Three (3) seconds after power-up or reset of the unit, the boot-up screen page
disappears to visualize the monitor page of the LiAM 6005.
The display is divided into for lines and the following data/information are
shown and updated every second:
- power supply or magnet identification – i.e. ID;
- output current readout value [A] with a 100µA resolution;
- output voltage readout value [V] with a 100µV resolution;
- the power supply status.
A sample of the monitor page of a LiAM power unit when the module output
is off is shown in
Figure 27
Figure 27: Readout display screen when module is OFF
The unit identification name identifies the specific power supply or the magnet
it is connected to. This ID is user defined and can be stored in the module internal
memory (on cell #27, please read the "memory mapping" section for further
information on this). The identification string is shown in the module first row and the
same value can be read remotely from EEPROM cell #27 or by using the MRID
command (check the remote communication section for further details).
Figure 28: Readout display screen when module is ON and regulating 1-A current
47
.
Local Display