Msp" Command - Caen ELS LiAM 6005 User Manual

LiAM User's Manual

5.3.15 "MSP" Command

The 'MSP\r' command returns the value of the power supply last stored set-
point current value.
Replies from the LiAM unit controller to this command are in the following
form:
where:
 value is the last stored output current set-point value [A].
The MSP command, being a reading command, returns a response in any
module condition.
Examples:
MSP example:
MSP\r
69
#MSP:value\r
Remote Control
#MSP:+1.23456\r