Table of Contents
Advertisement
Remote Control
5.3.12 "MRT" Command
The 'MRT\r' command returns the value of the maximum temperature directly
measured on the power output stage heatsink. The LiAM has two different
temperature sensors and the maximum value between these two is considered.
Even if the internal ADCs have a 12-bit resolution, this value is presented to
the user with a 0.1 °C (= 0.1 K) resolution.
Replies from the LiAM power supply unit to this command are in the following
form:
where:
value is the temperature value [°C = Celsius] measured on the output stage
heatsink.
It is also possible to read the single temperature values by sending the
commands 'MRT1\r' and 'MRT2\r' to the unit.
The MRT command, being a reading command, returns a response in any
module condition.
Examples:
MRT example:
MRT\r
MRT1 and MRT2 example:
MRT1\r
MRT2\r
#MRT:value\r
LiAM User's Manual
#MRT:37.2\r
#MRT:31.3\r
#MRT:37.2\r
66
Advertisement
Table of Contents
