Mrid" Command - Caen ELS LiAM 6005 User Manual

LiAM User's Manual

5.3.7 "MRID" Command

The 'MRID\r' command returns the LiAM module identification name as a
string.
The reply from the power supply contains the value stored in cell 27 of the
module EEPROM and it assumes the following format:
where:
 module_id is the module identification stored in non-volatile memory, as an
ASCII string.
This command is equivalent to the 'MRG:27\r' command, being the cited cell
content the user-selected module identification name.
The identification of the module can either be the power supply serial number,
a user-defined name or the reference name of the magnet that the corresponding
LiAM unit supplies (very useful in large installations).
The MRID command, being a reading command, returns a response in any
module condition.
Examples:
MRID example with the module identification "SkewMag1.3":
MRID\r
61
module_id\r
Remote Control
SKEWMAG1.3\r