Safety And Installation; General Safety Information; Initial Inspection - Caen ELS LiAM 6005 User Manual

Table of Contents

Advertisement

LiAM User's Manual
Please read carefully this general safety and installation information before
using the product.

2.1 General Safety Information

This section contains the fundamental safety rules for the installation and
operation of the system. Read thoroughly this section before starting any procedure of
installation or operation of the product.
Safety Terms and Symbols on the Product
These terms may appear on the product:
 DANGER indicates an injury hazard immediately accessible as you read the
marking;
 WARNING indicates an injury hazard not immediately accessible as you
read the marking;
 CAUTION indicates a hazard to property including the product.

2.2 Initial Inspection

Prior to shipment this system was inspected and found free of mechanical or
electrical defects. Upon unpacking of the system, inspect for any damage, which may
have occurred in transit. The inspection should confirm that there is no exterior
damage to the system such as broken knobs or connectors and that the front panels are
not scratched or cracked.
Keep all packing material until the inspection has been completed. If damage is
detected, file a claim with carrier immediately and notify CAEN ELS d.o.o. service
personnel (via fax or via e-mail message to info@caenels.com).
15

2. Safety and Installation

Safety and Installation

Advertisement

Table of Contents
loading

Table of Contents