Ip Address Configuration - Telnet Connection - Caen ELS LiAM 6005 User Manual

LiAM User's Manual

5.4.1 IP Address configuration - TELNET connection

If the power supply IP address is known by the user, it is also possible to
configure the new IP address by using a simple TELNET connection.
The TELNET connection must be established to port 9999 of the Ethernet
device of the power supply module.
Please carefully follow the instructions in order to correctly set/change the IP
address of the LiAM power supply module:

establish a TELNET connection to port 9999 of the module IP address - e.g.
192.168.0.10;

now press Enter on the prompt to enter configuration menu;

on the device Telnet-based menu first select the "Server" option by inserting
"0" and by pressing Enter on the prompt.
79
Remote Control