Table of Contents
Advertisement
Local Display
This chapter provides a brief description on the LiAM front panel local display
indications and different operation screens/pages.
4.1 Boot-up Page
During power-up or reset of the LiAM power supply unit, the module model
and the installed firmware version are displayed as shown in the following picture
(
).
Figure 26
The internal firmware version check can be also performed remotely by using
the 'VER' command (please see the Remote Control section for further information).
Figure 26: Boot-up display screen
LiAM User's Manual
4. Local Display
46
Advertisement
Table of Contents
