Table of Contents
Advertisement
Remote Control
an acknowledgment '#AK\r' string is sent back in case of a correct
setting command;
a non-acknowledgment '#NAK\r' string is sent back in case of a
wrong/unrecognized command or if the system is in local operation
mode and a write command is sent to the controller (write commands
are marked with a 'W' in
a standard reply, preceded by a '#' and followed by a '\r' character, is
sent back as a response to a reading command.
A brief description for each command, in alphabetical order, is herein
presented with some example annotations; the correct interpretation for these
examples is as follows:
Command sent
TO
Table 6
the power supply
LiAM User's Manual
);
Reply
FROM
the power supply
52
Advertisement
Table of Contents
