Remote Control; Preliminary Information; List Of Commands - Caen ELS LiAM 6005 User Manual

Remote Control

The LiAM power supply module can be remotely controlled via a standard
Ethernet 10/100 link accessible from the module front panel using a predefined set of
commands.

5.1 Preliminary Information

In order to ensure a correct communication with a LiAM module, the following
rules have to be pointed out:
 commands TO the LiAM power supply module must be sent with a
'\r' (carriage return, 0x0D hexadecimal number) termination
character;
 replies FROM the LiAM power supply also have a '\r' (carriage
return, 0x0D hexadecimal number) termination character.
A complete list of commands (except for reserved commands) is herein
presented and an overview for each command syntax and functionality follows.
The configurability of this power supply leads to a very widespread command
list, thus typical users may only need a small set of commands in order to run the
LiAM unit in a satisfying way.

5.2 List of Commands

The user-available commands, as well as a brief description and their read or
write functionality, are summarized in the following table -
Command
FDB
MOFF
MON
MRESET
5. Remote Control
Description
Feedback command
Turn the module OFF
Turn the module ON
Reset the module status register
LiAM User's Manual
:
Table 6
Read/Write
W
W
W
W
50