Table of Contents
Advertisement
Safety and Installation
2.9.2 Protection Covers - optional
Plastic protections can be provided and can be installed on the rear side of the
crate in order to avoid contact of the users with conductors at a dangerous potential.
The cablings of the three-phase input conductors are shown hereafter. Please be sure
to execute all these operations with the AC mains unplugged from the power
distribution network.
The AC mains cable needs to be fit inside the hole centering also a plastic
cable tie that it is housed inside the plastic housing (pass the cable tie inside the two
small holes as shown in
Figure 11: AC mains conductors and cable-tie
Now fix the three conductors and the PE cable to the screw terminals placed
on the rear side of the crate as shown in
Figure 12: AC mains conductors connected to the terminal blocks
The plastic protection can now be fixed to the rear panel by screwing the four
screws placed on the four corners of the housing. Once connected, it is necessary to
).
Figure 11
Figure 12
LiAM User's Manual
.
22
Advertisement
Table of Contents
