Safety and Installation
Figure 4: installation of LiAM units in a 19" cabinet
The three-phase input connections – i.e. earth and the three lines L1, L2 and
L3 – are placed on a terminal block connector on the rear of the crate, as shown in
:
Figure 5
Figure 5: rating plate and three-phase input terminal connector
The power supply rating plate can be found on the rear panel of the LiAM
power unit, indicating input ratings:
3 × 200 VAC ± 10%;
-
50-60 Hz;
-
550W input power.
-
Please connect the EARTH cable to the terminal connection marked
with the following symbol FIRST:
WARNING
LiAM User's Manual
18