Table of Contents
Advertisement
LiAM User's Manual
Safety and Installation
WARNING
BE AWARE THAT ONCE CONNECTED, THE AC VOLTAGE
LINES L1, L2 and L3 are ACCESSIBLE FROM THE REAR
SCREW HOLE TERMINALS AS INDICATED IN THE
FOLLOWING FIGURE
Figure 6: screw terminals at dangerous potential
NEVER connect L1, L2 and L3 lines if AC power is present on the
corresponding cables. Always disconnect wall AC plugs before making these
connections. Using a screwdriver on these screw terminal connection may cause a
serious ELECTRICAL SHOCK (refer to
).
Figure 6
2.9.1 Installation and Cabling Procedure
Connections to the LiAM power supply units must be carried out in the order
herein presented. Please read and follow these indications carefully:
19
Advertisement
Table of Contents
