Control Panel - Fuji Xerox DocuPrint CM415 AP User Manual

2 Product Overview

Control Panel

The following describes the names and functions of components on the control panel.
2
18
19
20
21
No. Component
1 Touch screen
2 <Log In/Out> button
3 <Job Status> button
4 <Machine Status> button
5 <Power Saver> button
6 <Clear All> button
68
Services Home
ABC DEF Log In / Out
1 2 3
Dial
Copy
Pause
GHI JKL MNO
4 5 6
Interrupt
Speed
(Not In Use)
PQRS TUV WXYZ Dial
7 8 9
Review
0
C
＃
Power
14
17 15 13
16
Displays messages required for operation, and buttons for various features.
You can directly touch the touch screen to instruct operations and set
features.
Lights up when a user is authenticated in the System Administration mode,
the Authentication mode, or the Accounting mode. Displays the User ID
entry screen for entering the System Administration mode, the
Authentication mode, or the Accounting mode. Press this button to exit
these modes.
Press this button to check or cancel the current job, to check or print stored
jobs, or to check completed jobs.
Press this button to check the machine status and meters, to check the
status of consumables, and to print reports.
When the machine is not used for a while, it enters the Power Saver mode to
reduce power consumption. When the Power Saver mode is active, the
<Power Saver> button lights up.
Press this button to enter or exit the Power Saver mode.
Returns the settings you made to the default values. The machine returns to
the same state as when it is powered on.
Job Machine Power
Status Status Saver
Clear All
Stop
Start
Data Error
12 11
Function
1
2
3
4
5
6
7
8
9
10