Adjustment Of Saturation - Oki MB760 Service Manual

4.4.9

Adjustment of saturation

The saturation of the scanned image is adjusted for color-scanning.
<Adjustment Mode (05)>
Code Original mode
8324 Text/Photo
8325 Text
8326 Photo
8373 Custom mode
<Procedure>
(1) While pressing [0] and [5] simultaneously, turn the power ON.
(2) Key in the codes and press the [START] button.
(3) Key in the adjustment values. Acceptable values: 0 to 255.
(To correct the value once keyed in, press the [CLEAR] button.)
(4) Press the [OK] or [INTERRUPT] button to store the value in the memory. → The equipment
goes back to the ready state.
(5) Let the equipment restart and perform the scanning job.
(6) If the desired image has not been attained, repeat step (1) to (5).
4.4.10 Background offsetting adjustment for RADF (common for copy, scan and fax)
The background level for scanning originals with the RADF is adjusted when the background
fogging at the scanning of a manually-set original and an original used with the RADF is
different. This is to adjust the level of the background image removed when the scanning of the
originals with the RADF is performed.
<Adjustment Mode (05)>
Color mode
Color
Black
<Procedure>
The procedure is the same as that of  P. 4-15 "4.4.2 Density adjustment".
45641001TH Rev.1
The larger the value is, the brighter the image becomes. The
smaller the value is, the duller the image becomes.
Acceptable values: 0 to 255 (Default: 128)
Code
7026 The larger the value is, the darker the background density becomes.
Acceptable values: 0 to 255 (Default: 128)
7025
Oki Data CONFIDENTIAL
Remarks
Remarks
4-19 /