[ea2B] Paper transport jam (exit transport sensor)
Classification
Paper jam in finisher section
Check item
Transport path
Exit transport sensor
Finisher control PC board
Parts to be replaced
Exit transport sensor
Finisher control PC board
[ea31] Power-ON jam
Classification
Paper jam in finisher section
Check item
Transport path
Entrance transport sensor
Exit transport sensor
Finisher control PC board
Parts to be replaced
Entrance transport sensor
Exit transport sensor
Finisher control PC board
45641001TH Rev.1
Paper stayed for longer than set period at exit transport sensor while
being transported in finisher transport path.
If there is paper in the paper transport path, remove the paper.
• Sensor check (S2)
• Connector check (P8-1)
• Harness check
• Board check
• Connector check (J7, J8)
• Harness check
Paper was detected at either the entrance transport sensor or the exit
transport sensor when the power was on or the finisher's side cover was
closed.
If there is paper in the paper transport path, remove the paper.
• Sensor check (S1)
• Connector check (P7-2)
• Harness check
• Sensor check (S2)
• Connector check (P8-1)
• Harness check
• Board check
• Connector check (J7, J8)
• Harness check
Oki Data CONFIDENTIAL
Error content
Measures
Remark
Error content
Measures
Remark
5-30 /