Oki MB760 Service Manual page 86

Notes:
• Do not remove the USB device while the LED in the MFP is blinking.
• If the LED does not start blinking after the USB device is inserted and a few minutes
have passed, try the procedure from step 1 again.
• If there is no beeping after the LED starts blinking (about 20 minutes), try procedure
from step 1 again.
• If the USB device is inserted when the MFP is not ready, the debug logs cannot be
collected.
5. Collected debug logs
- When the collection of the debug logs is completed, the compressed file of the collected
logs is stored in the root directory of the USB device.
File name: XXXX.YYYYMMDDHHmmSS
(XXXX= Serial number of the equipment, YYYY= year, MM= month, DD= day, HH= hour,
mm= minute, SS= second)
- After the debug logs have been collected, be sure to send them to the service center
together with a report.
45641001TH Rev.1
Oki Data CONFIDENTIAL
5-3 /