Oki MB760 Service Manual page 34

Procedure 7
[Digital key]
[0][5]
(Code)
[POWER]
* When the automatic adjustment ends abnormally, an error message is displayed.
* Return to standby screen by pressing the [CANCEL] or [CLEAR] button.
Procedure 10
[0][5]
[POWER]
Procedure 12
[Digital key]
[0][5]
[POWER]
Procedure 14
[0][5]
[Digital key]
[POWER]
(Code)
Notes:
The fuser belt temperature control at the adjustment mode is different from that at the normal
state. Therefore, the problem of fusing efficiency may be occurred in the test copy at the
adjustment mode. In that case, turn ON the power normally, leave the equipment for approx. 3
minutes after it has become ready state and then start up the adjustment mode again.
45641001TH Rev.1
[CANCEL]
[Digital key]
[START]
(Sub code)
[CLEAR]
(Corrects value)
*[CANCEL] or [CLEAR]
[Digital key] [Digital key]
[START]
(Code) (Sub code)
[OK] or [INTERRUPT]
(Value unchangeable)
[START] [Digital key]
(Code)
(Key in a value)
[CANCEL]
[Digital key]
[START]
(Sub code)
[CLEAR]
(Corrects value)
Automatic
[START]
Stores value
adjustment
Value
[START]
displayed
[OK]
Manual
or
adjustment
[INTERRUPT]
(Stores value in RAM)
[CLEAR]
(Corrects value)
(Input value)
[START]
[FUNCTION CLEAR]
(Corrects value)
Oki Data CONFIDENTIAL
[FAX]
[OK]
[POWER]
OFF/ON
[START]
in RAM
(Test copy)
[POWER]
[START]
OFF/ON
(Exit)
[FAX]
[POWER]
OFF/ON
[START]
(Exit)
(Test copy)
[OK]
[FAX]
[POWER]
or
OFF/ON
[INTERRUPT]
[START]
(Exit)
Stores value
(Test copy)
in RAM
(Exit)
3-11 /