Oki MB760 Service Manual page 370

05/ Sub
Mode Element
08 element
08 Setting System Paper Paper size (bypass
mode feeding feeding/non-
standard type)
08 Setting System Paper Paper size (bypass
mode feeding feeding/non-
standard type)
08 Setting System User Sound
Mode interface
08 Setting System General Banner advertising
mode
08 Setting System General Banner advertising
mode
08 Setting System General Banner advertising
mode
08 Setting System General Banner advertising
mode
08 Setting System Network
mode
08 Setting System User
mode interface
08 Setting System Network Print
mode
45641001TH Rev.1
Sub-
Item Subitem Code
code
9320
9321
9325
9327
9328
9329
9330
9331
9332
9334
Default Acceptable
Details RAM
value value
Memory 3 127/64 127-356/ SYS Registers the paper size of bypass feed (non-standard
64-216
Memory 4 127/64 127-356/ SYS Registers the paper size of bypass feed (non-standard
64-216
Key touch sound of 1 0-1 SYS 0: OFF
control panel
Setting of banner 0 0-1 SYS Sets whether or not displaying the banner advertising.
advertising display
Banner advertising - - SYS Maximum 27 letters (one-byte character)
display 1
Banner advertising - - SYS Maximum 27 letters (one-byte character)
display 2
Display of 0 0-1 SYS 0: Not displayed
[BANNER
MESSAGE] button
Local I/F time-out 6 1-50 SYS Sets the period of time when the job is judged as
period
Original counter Refer to 0-4 SYS Sets whether the original counter is displayed or not.
display contents
PCL line feed code 0 0-3 SYS Sets the PCL line feed code.
setting
Oki Data CONFIDENTIAL
Contents
type) into [MEMORY 3].
Feeding/Widthwise direction.
type) into [MEMORY 4].
Feeding/Widthwise direction.
1: ON
The setting contents of 08-9328 and 9329 are displayed
at the time display section on the right top of the screen.
When both are set, each content is displayed alternately.
0: Not displayed
1: Displayed
1: Displayed
This button enables the entry of "Banner advertising
display 1 (08-9328)" and "Banner advertising display 2
(08-9329)" on the control panel.
completed in local I/F printing (USB or parallel).
1: 1.0 sec.
2: 1.5 sec.
50: 25.5 sec.
(in increments of 0.5 sec.)
0: Not displayed
2: Displayed
4: Displayed (Double sized original is counted as 2.)
<Default value>
ODA/JP: 0
Others: 2
0: Automatic setting
1: CR=CR, LF=LF
2: CR=CR+LF, LF=LF
3: CR=CR, LF=CR+LF
Proce-
dure
10
10
1
1
11
11
1
1
1
1
11-72 /