Oki MB760 Service Manual page 219

(2) Touch Panel Setting
Each item is set from the Auto Supply Order screen on the touch panel.
Entering the password and customer information is required because the setting is made
from the ADMIN screen. Setting it with the administrator is a must.
• Basic setting
[ADMIN] > [SERVICE] > [SUPPLY ORDER SETUP] > [ORDER INFORMATION]
AUTO SUPPLY ORDER
FAX NUMBER
E-MAIL
CUSTOMER
NAME
TEL NUMBER
E-MAIL
ADDRESS
SUPPLIER
NAME
ADDRESS
SERVICE TECNICIAN
NUMBER
NAME
TEL NUMBER
E-MAIL
*1 HTTP has not been supported yet.
*2 Even when "FAX" is selected, the order is not placed without entering the FAX number.
*3 Even when "MAIL" is selected, the order is not placed without entering the E-mail address.
• Detailed setting for the order
[ADMIN] > [SERVICE] > [SUPPLY ORDER SETUP] > [TONER ORDERING]
***** TONER ORDER
PART NUMBER
CONDITIOIN
QUANTITY
AUTO ORDER
* The order is placed when the number of replacement reaches the number specified for the
CONDITION.
• FAX number of this equipment (common information)
[ADMIN] > [FAX] > [TERMINAL ID]
ID NAME
FAX NUMBER
45641001TH Rev.1
Ordered by: [FAX], [MAIL], [HTTP] (*1)
FAX number of supplier (*2)
E-mail address of supplier (*3)
Customer information
Supplier information
Service technician information
Order information (TONER)
Part number to be ordered
The number of conditions (*)
The quantity to be ordered
ON/OFF setting of order for each part
ID name of this equipment
FAX number of this equipment
Oki Data CONFIDENTIAL
7-2 /