ZyXEL Communications ZyWall USG 2000 User Manual page 932

Appendix A Log Descriptions
Table 275 L2TP Over IPSec Logs
LOG MESSAGE
The configuration of
L2TP over IPSec has
been changed.
L2TP over IPSec may not
work since Crypto Map
%s using Manual Key.
L2TP over IPSec may not
work since Crypto Map
%s using Tunnel Mode.
L2TP over IPSec may not
work since Crypto Map
%s is deactivated.
User %s has been denied
from L2TP service.
(Inexistent User)
User %s has been denied
from L2TP service.
(Disallowed User)
User %s has been denied
from L2TP service.
(Incorrect Password)
User %s has been denied
from L2TP
service.(Incorrect
Username or Password)
User has been denied
from L2TP service.
(address pool
exhausted)
User %s has been
granted an L2TP over
IPSec session.
L2TP over IPSec
sessions have been all
disconnected since
configuration of
Tunnel %s has been
changed
932
DESCRIPTION
The L2TP over IPSec configuration has been modified.
L2TP over IPSec does not support manual key management.
L2TP over IPSec may not work because the IPSec VPN
connection it uses (Crypto Map %s) has been set to use
manual key management.
L2TP over IPSec does not support tunnel mode
encapsulation. L2TP over IPSec may not work because the
IPSec VPN connection it uses (Crypto Map %s) has been set
to use tunnel mode encapsulation.
L2TP over IPSec may not work because the IPSec VPN
connection it uses (Crypto Map %s) has been turned off.
A user with the specified user name (%s) was denied access
to the L2TP over IPSec service because the user name does
not exist.
A user with the specified user name (%s) was denied access
to the L2TP over IPSec service because the user name is not
specified in the L2TP over IPSec configuration.
A user with the specified user name (%s) was denied access
to the L2TP over IPSec service because the correct password
was not provided.
A user with the specified user name (%s) was denied access
to the L2TP over IPSec service because an incorrect user
name or password was provided.
An attempted login to the L2TP over IPSec service failed
because the L2TP over IPSec IP address pool does not have
any more IP addresses to give out.
A user with the specified user name (%s) was given access
to the L2TP over IPSec service.
L2TP over IPSec may not work because the configuration of
the IPSec VPN connection it uses (Crypto Map %s) has been
changed.
ZyWALL USG 2000 User's Guide