ZyXEL Communications ZyWall USG 2000 User Manual page 174

Unified security gateway

Hide thumbs Also See for ZyWall USG 2000:

Table of Contents

Chapter 8 L2TP VPN Example

• Configure the My Address setting. This example uses interface ge2 with

static IP address 172.16.1.2.

Note: If it is possible that the remote user's public IP address could be in the same

subnet as the specified My Address, click Configure > Network > Routing >

Policy Route > Show Advanced Settings and select Use Policy Route to

Override Direct Route.

• Select Pre-Shared Key and configure a password. This example uses top-

secret. Click OK.

Figure 137 Configuration > VPN > IPSec VPN > VPN Gateway > Edit

Select the Default_L2TP_VPN_GW entry and click Activate and click Apply to

turn on the entry.

Figure 138 Configuration > VPN > IPSec VPN > VPN Gateway (Enable)

ZyWALL USG 2000 User's Guide

Troubleshooting