ZyXEL Communications ZyWall USG 2000 User Manual page 958

Appendix A Log Descriptions
Table 287 Policy Route Logs (continued)
LOG MESSAGE
BWM has been
deactivated.
Interface %s alive,
related policy route
rules will be re-
enabled
Interface %s dead,
related policy route
rules will be disabled
Trunk %s alive,
related policy route
rules will be re-
enabled
Trunk %s dead, related
policy route rules
will be disabled
Table 288 Built-in Services Logs
LOG MESSAGE
User on %u.%u.%u.%u
has been denied access
from %s
HTTPS certificate:%s
does not exist. HTTPS
service will not work.
HTTPS port has been
changed to port %s.
HTTPS port has been
changed to default
port.
HTTP port has changed
to port %s.
HTTP port has changed
to default port.
SSH port has been
changed to port %s.
SSH port has been
changed to default
port.
SSH certificate:%s
does not exist. SSH
service will not work.
958
DESCRIPTION
The global setting for bandwidth management on the ZyWALL
has been turned off.
An interface came back up so the ZyWALL will use the related
policy route rules again.
An interface went down so the ZyWALL will stop using the
related policy route rules.
A trunk came back up so the ZyWALL will use the related
policy route rules again.
A trunk went down so the ZyWALL will stop using the related
policy route rules.
DESCRIPTION
HTTP/HTTPS/TELNET/SSH/FTP/SNMP access to the device
was denied.
%u.%u.%u.%u is IP address
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET
An administrator assigned a nonexistent certificate to HTTPS.
%s is certificate name assigned by user
An administrator changed the port number for HTTPS.
%s is port number
An administrator changed the port number for HTTPS back to
the default (443).
An administrator changed the port number for HTTP.
%s is port number assigned by user
An administrator changed the port number for HTTP back to
the default (80).
An administrator changed the port number for SSH.
%s is port number assigned by user
An administrator changed the port number for SSH back to
the default (22).
An administrator assigned a nonexistent certificate to SSH.
%s is certificate name assigned by user
ZyWALL USG 2000 User's Guide