Configuring The Legacy Mode Screen - ZyXEL Communications ZyWall USG 2000 User Manual

Unified security gateway

Hide thumbs Also See for ZyWall USG 2000:

Table of Contents

Chapter 39 Device HA

39.6 Configuring the Legacy Mode Screen

The Device HA Legacy Mode screen lets you configure general legacy mode HA

settings including link monitoring, configure the VRRP group and synchronize

backup ZyWALLs. To access this screen, click Configuration > Device HA >

Legacy Mode.

Figure 458 Configuration > Device HA > Legacy Mode

The following table describes the labels in this screen. See

for more information as well.The Legacy Mode Add/Edit Screen

Table 184 Configuration > Device HA > Legacy Mode

General Settings

Link Monitoring

Stop Cellular

while one of

interface is

Monitored Interface Summary

Enable link monitoring to have the master ZyWALL shut down all of its

VRRP interfaces if one of its VRRP interface links goes down. This way

the backup ZyWALL takes over all of the master ZyWALL's functions.

Select this to have the master ZyWALL shut down any 3G interfaces if

one of its VRRP interface links goes down. Clear this if you still want

users to be able to use the ZyWALL's 3G connection even when a VRRP

interface link goes down.

Click this to create a new entry.

Select an entry and click this to be able to modify it.

Select an entry and click this to delete it.

To turn on an entry, select it and click Activate. Activating a VRRP

group has the ZyWALL monitor the connection of the group's interface.

Each interface must have a static IP address and be connected to the

same subnet as the group's interface on the other ZyWALL.

Table 185 on page 689

ZyWALL USG 2000 User's Guide