ZyXEL Communications ZyWall USG 2000 User Manual page 740

Chapter 44 AAA Server
Table 209 Configuration > Object > AAA Server > RADIUS > Add (continued)
LABEL
Timeout
Key
Group
Membership
Attribute
OK
Cancel
740
DESCRIPTION
Specify the timeout period (between 1 and 300 seconds) before the
ZyWALL disconnects from the RADIUS server. In this case, user
authentication fails.
Search timeout occurs when either the user information is not in the
RADIUS server or the RADIUS server is down.
Enter a password (up to 15 alphanumeric characters) as the key to be
shared between the external authentication server and the ZyWALL.
The key is not sent over the network. This key must be the same on the
external authentication server and the ZyWALL.
A RADIUS server defines attributes for its accounts. Select the name and
number of the attribute that the ZyWALL is to check to determine to
which group a user belongs. If it does not display, select user-defined
and specify the attribute's number.
This attribute's value is called a group identifier; it determines to which
group a user belongs. You can add ext-group-user user objects to
identify groups based on these group identifier values.
For example you could have an attribute named "memberOf" with values
like "sales", "RD", and "management". Then you could also create a ext-
group-user user object for each group. One with "sales" as the group
identifier, another for "RD" and a third for "management".
Click OK to save the changes.
Click Cancel to discard the changes.
ZyWALL USG 2000 User's Guide