ZyXEL Communications ZyWall USG 2000 User Manual page 423

Click Configuration > Auth. Policy to display the screen.
Figure 312 Configuration > Auth. Policy
The following table gives an overview of the objects you can configure.
Table 108 Configuration > Auth. Policy
LABEL
Enable
Authentication
Policy
Exceptional
Services
Authentication
Policy
Summary
Add
Edit
Remove
Activate
Inactivate
Move
ZyWALL USG 2000 User's Guide
DESCRIPTION
Select this to turn on the authentication policy feature.
Use this table to list services that users can access without logging in.
Click Add to change the list's membership.
In the table, select one or more entries and click Remove to delete it or
them.
Use this table to manage the ZyWALL's list of authentication policies.
Click this to create a new entry. Select an entry and click Add to create
a new entry after the selected entry.
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL confirms
you want to remove it before doing so.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
To move an entry to a different number in the list, click the Move icon.
In the field that appears, specify the number to which you want to move
the interface.
Chapter 23 Authentication Policy
423