Tutorials; Chapter 7 Tutorials; How To Configure Interfaces, Port Grouping, And Zones; Technical Reference - ZyXEL Communications ZyWall USG 2000 User Manual

Unified security gateway

Hide thumbs Also See for ZyWall USG 2000:

Table of Contents

Here are examples of using the Web Configurator to set up features in the

ZyWALL. See also

Note: The tutorials featured here require a basic understanding of connecting to

and using the Web Configurator, see

descriptions of individual screens, see

7.1 How to Configure Interfaces, Port Grouping,

This tutorial shows how to configure Ethernet interfaces, port grouping, and zones

for the following example configuration (see

default configuration).

• Interface ge2 uses a static IP address of 1.2.3.4 and is in the WAN zone.

• DMZ servers are connected to ports P4 and P5 and need full wire speed

communication with each other, so ports P4 and P5 are combined into a ge4

interface port group. It uses IP address 192.168.2.1.

ZyWALL USG 2000 User's Guide

Chapter 8 on page 173

Chapter 3 on page 51

Technical Reference on page

Tutorials

for an example of configuring L2TP VPN.

for details. For field

Section 6.2.2 on page 100