How To Use Multiple Static Public Wan Ip Addresses For Lan To Wan Traffic; Create The Public Ip Address Range Object - ZyXEL Communications ZyWall USG 2000 User Manual

Click Configuration > Firewall > Add. Set the From field as DMZ and the To
1
field as LAN. Set the Destination to the IPPBX's DMZ IP address object
(DMZ_SIP). Set the
and click OK.
Figure 125 Configuration > Firewall > Add
7.13 How to Use Multiple Static Public WAN IP
Addresses for LAN to WAN Traffic
If your ISP gave you a range of static public IP addresses, here is how to configure
a policy route to have the ZyWALL use them for traffic it sends out from the LAN.

7.13.1 Create the Public IP Address Range Object

Click Configuration > Object > Address > Add to create the address object
that represents the range of static public IP addresses. In this example you name
it Public-IPs and it goes from 1.1.1.10 to 1.1.1.17.
Figure 126 Creating the Public IP Address Range Object
ZyWALL USG 2000 User's Guide
to IPPBX_DMZ. Leave the Access field to allow
Source
Chapter 7 Tutorials
165