Vlan Add/Edit - ZyXEL Communications ZyWall USG 2000 User Manual

Table 68 Configuration > Network > Interface > VLAN (continued)
LABEL
IP Address
Mask
Apply
Reset

13.6.2 VLAN Add/Edit

This screen lets you configure IP address assignment, interface bandwidth
parameters, DHCP settings, and connectivity check for each VLAN interface. To
access this screen, click the Add icon at the top of the Add column or click an
Edit icon next to a VLAN interface in the VLAN Summary screen. The following
screen appears.
ZyWALL USG 2000 User's Guide
DESCRIPTION
This field displays the current IP address of the interface. If the IP address is
0.0.0.0, the interface does not have an IP address yet.
This screen also shows whether the IP address is a static IP address
(STATIC) or dynamically assigned (DHCP). IP addresses are always static
in virtual interfaces.
This field displays the interface's subnet mask in dot decimal notation.
Click Apply to save your changes back to the ZyWALL.
Click Reset to return the screen to its last-saved settings.
Chapter 13 Interfaces
317