ZyXEL Communications ZyWall USG 2000 User Manual page 182

Chapter 8 L2TP VPN Example
inside it. The L2TP tunnel itself does not need encryption since it is inside the
encrypted IPSec VPN tunnel.
Figure 150 Connect ZyWALL L2TP: Security > Advanced > Warning
11 Click Networking. Set the Type of VPN to L2TP IPSec VPN and click IPSec
Settings.
Figure 151 L2TP to ZyWALL Properties > Networking
12 Select Use preshared key for authentication and enter the pre-shared key of
the VPN gateway configuration that the ZyWALL is using for L2TP VPN (top-secret
in this example). Click OK to close the IPSec Settings window and then click OK
again to close the Properties window.
Figure 152 L2TP to ZyWALL Properties > Networking > IPSec Settings
182
ZyWALL USG 2000 User's Guide