ZyXEL Communications ZyWall USG 2000 User Manual page 957

Table 287 Policy Route Logs
LOG MESSAGE
Can't open bwm_entries Policy routing can't activate BWM feature.
Can't open link_down
Cannot get handle from
UAM, user-aware PR is
disabled
mblock: allocate
memory failed!
pt: allocate memory
failed!
To send message to
policy route daemon
failed!
The policy route %d
allocates memory fail!
The policy route %d
uses empty user group!
The policy route %d
uses empty source
address group!
The policy route %d
uses empty destination
address group!
The policy route %d
uses empty service
group
Policy-route rule %d
was inserted.
Policy-route rule %d
was appended.
Policy-route rule %d
was modified.
Policy-route rule %d
was moved to %d.
Policy-route rule %d
was deleted.
Policy-route rules
were flushed.
BWM has been
activated.
ZyWALL USG 2000 User's Guide
DESCRIPTION
Policy routing can't detect link up/down status.
User-aware policy routing is disabled due to some reason.
Allocating policy routing rule fails: insufficient memory.
Allocating policy routing rule fails: insufficient memory.
Failed to send control message to policy routing manager.
Allocating policy routing rule fails: insufficient memory.
%d: the policy route rule number
Use an empty object group.
%d: the policy route rule number
Use an empty object group.
%d: the policy route rule number
Use an empty object group.
%d: the policy route rule number
Use an empty object group.
%d: the policy route rule number
Rules is inserted into system.
%d: the policy route rule number
Rules is appended into system.
%d: the policy route rule number
Rule is modified.
%d: the policy route rule number
Rule is moved.
1st %d: the original policy route rule number
2nd %d: the new policy route rule number
Rule is deleted.
%d: the policy route rule number
Policy routing rules are cleared.
The global setting for bandwidth management on the ZyWALL
has been turned on.
Appendix A Log Descriptions
957