Rack-Mounted Installation Procedure - ZyXEL Communications ZyWall USG 2000 User Manual

Chapter 1 Introducing the ZyWALL
standard EIA rack using a rack-mounting kit. Make sure the rack will safely
support the combined weight of all the equipment it contains and that the position
of the ZyWALL does not make the rack unstable or top-heavy. Take all necessary
precautions to anchor the rack securely before installing the unit.
Note: Leave 10 cm of clearance at the sides and 20 cm in the rear.
Use a #2 Phillips screwdriver to install the screws.
Note: Failure to use the proper screws may damage the unit.

1.2.1 Rack-Mounted Installation Procedure

Align one bracket with the holes on one side of the ZyWALL and secure it with the
1
included bracket screws (smaller than the rack-mounting screws).
Attach the other bracket in a similar fashion.
2
Figure 1 Attaching Mounting Brackets and Screws
34
ZyWALL USG 2000 User's Guide