Lexmark W850n Manual page 213

12.
Remove the e-clip securing the shaft (F) to the front of the finisher.
13.
Remove the 8 mm bushing (E) on the front side.
14.
Gently move the left side of the media eject unit assembly (G) out of the finisher followed by the right side.
Note: Do not force the media eject unit assembly out of the finisher. Remove the left side before the right
side.
Note: Tilting the media eject unit assembly slightly may make the removal easier.
Right
15.
Remove the media eject unit assembly.
Front
G
F
E
E-clip
Repair information
4024-110
4-61