Lexmark W850n Manual page 185

5.
Remove the two screws securing the bin bracket (C) to the right carriage bracket (D).
6.
Remove the spring (E) from the right carriage bracket (D).
7.
Remove the screw securing the upper belt clamp (F) to the right carriage bracket (D).
8.
Remove the upper belt clamp (F).
9.
Remove the right carriage bracket (D) with the carriage lift belt (G) from the finisher.
10.
Release the hook securing the carriage lift belt (G) to the lower belt clamp (H).
11.
Remove the carriage lift belt (G).
Replacement notes:
•
Make sure the carriage lift belt (G) is inserted into the upper belt clamp (F) as shown.
•
Make sure the bin bracket (C) is level to prevent binding.
C
D
H
4024-110
G
F
Rear
E
Repair information
4-33