4024-110
Punch media stop assembly removal
1.
Open the finisher front door assembly.
2.
Remove the rear upper cover. See
3.
Remove the punch carriage assembly. See
4.
Remove the punch unit assembly. See
5.
Remove the three screws securing the three punch media stop assemblies (A) to the punch unit
assembly (B).
6.
Remove the three punch media stop assemblies (D).
4-46
Finisher Service Manual
"Rear upper cover removal" on page
"Punch carriage assembly removal" on page
"Punch unit assembly removal" on page
4-24.
4-41.
4-45.