Drive Motor (Exit) Assembly And Belt (Exit) Removal - Lexmark W850n Manual

Drive motor (exit) assembly and belt (exit) removal

1.
Remove the rear upper cover. See
2.
Loosen the two screws securing the belt tensioner bracket (A) to the finisher, and move it down as shown.
3.
Remove the belt (exit) (B) from the drive motor (exit) assembly (C).
4.
Disconnect the connector from the drive motor (exit) assembly.
"Rear upper cover removal" on page
A
A
Second
First
B
C
Rear
4-24.
Connector
Repair information
4024-110
4-113