Ubee Interactive
4.3
Wireless Menu
This chapter contains instructions for all wireless configuration settings.
Important: The Wireless menu functions are available on the DDW2600 Wireless
Cable Modem/Router only.
1. Access the web interface. Refer to
2. Click the Wireless link from the top of the screen.
4.3.1
The Basic option allows you to configure key wireless operations including channel
selection, bandwidth control, and the primary broadcast SSID.
1. Access the web interface. Refer to
2. Click the Wireless link from the top of the screen.
3. Click Basic from the left side of the screen. The Basic fields are explained
following this screen example.
Label
DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010
Wireless - Basic
Wireless MAC Address
Network Name (SSID)
Broadcast SSID
Country
page
14, if needed.
page
14, if needed.
Description
Displays the MAC address of wireless router's wireless
module.
Use this field to use the existing or enter a new Service Set
Identifier (SSID). Wireless clients connecting to the wireless
router use this SSID as the address to establish the wireless
network connection. Refer to
the device's default SSID.
Click Enable to allow broadcast of SSID.
When set to USA, channels 1 to 11 is available. If selecting
worldwide, 13 channels are available.
4.3 Wireless Menu
page 7
for more information on
49